1.Remove the cap and the nuts, and then remove the wiper arm (A).
Tightening torque :22.6 - 26.5 N.m (2.3 - 2.7 kgf.m, 16.6 - 19.5 lb-ft)

2.Disconnect the washer nozzle (A).

3.Loosen the mounting clips, remove the cowl top cover (A).

4.To install, reverse removal procedure.
• Replace any damaged clips (or pin-type retainers).
Components and Components Location
Floor ConsoleHyundai Tucson (NX4) 2022-2025 Service Manual: Integrated Thermal Management Module (ITM)
- Description
Integrated Thermal Management Module (ITM) is a device that controls
the coolant flow rate according to coolant temperature. At initial
startup, the ITM quickly warms up the engine by controlling the flow of
the coolant and this fast warm-up helps improve the fuel efficiency.W ...
Hyundai Tucson (NX4) 2022-2025 Service Manual: Fuel Filler Door Release Actuator
- Inspection
1.Disconnect the negative (-) battery terminal.
2.Remove the fuel filler housing after opening the fuel filler door.(Refer to Body - "Fuel Filler Door")
3.Disconnect the connector (A) and then remove tht release actuator (B) after loosening mounting screws.
4.Check for continu ...