Hyundai Tucson (NX4) 2022-2026 Service Manual / Body (Interior and Exterior) / Cowl Top Cover

Hyundai Tucson: Body (Interior and Exterior) / Cowl Top Cover

Components and Components Location

- Component Location

1. Cowl Top Cover

Repair procedures

- Replacement

1.Remove the cap and the nuts, and then remove the wiper arm (A).

Tightening torque :22.6 - 26.5 N.m (2.3 - 2.7 kgf.m, 16.6 - 19.5 lb-ft)

2.Disconnect the washer nozzle (A).

3.Loosen the mounting clips, remove the cowl top cover (A).

4.To install, reverse removal procedure.

• Replace any damaged clips (or pin-type retainers).

Other information:

Hyundai Tucson (NX4) 2022-2026 Service Manual: Intake Air Temperature Sensor (IATS)
- Description Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature.To calculate precise air quantity, correction of the air temperature is needed because air density varies according to the temperature. So the ECM ...

Hyundai Tucson (NX4) 2022-2026 Service Manual: Front Seat Back Cover
- Component Location 1. Front seat back cover - Replacement • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Put on gloves to prevent hand injuries. • Tak ...