Hyundai Tucson: Steering System / Repair procedures
Steering Wheel Play Inspection
1.Turn the steering wheel so that the front wheels can face straight ahead.
2.Mark the center of the steering wheel.
3.Measure the distance that the steering wheel can be turned with out moving the front wheels.
Standard value : 0 - 30mm (1.1811in.) or less
4.If the play exceeds standard value, inspect the steering column, shaft, and linkages.
Checking Stationary Steering Effort
1.Position the vehicle on a level surface and place the steering wheel in the straight ahead position.
2.Attach a spring scale to the steering wheel. With the idle RPM, pull the scale and read it as soon as the tires begin to turn.
Standard value : 3.0kgf
Special Service Tools
- Special Service Tools
Tool (Number and Name)IIIustrationUse
09568-1S100Ball joint remover
Removal of the tie rod end ball joint.
09568-4R100Lower arm ball joint remover
Removal of the lower ar ...
Steering wheel
...
Other information:
Hyundai Tucson (NX4) 2022-2025 Service Manual: Front Wheel Transfer Assembly
- Removal
[A Type]
• Be careful not to damage the parts located under the vehicle
(floor under cover, fuel filter, fuel tank and canister) when raising
the vehicle using the lift.(Refer to General Information - "Lift and
Support Points")
1.Remove the engine room und ...
Hyundai Tucson (NX4) 2022-2025 Owner's Manual: Manual Speed Limit Assist
Operation
To set speed limit
1. Press and hold the Driving Assist
() button at the desired speed.
The Manual Speed Limit Assist
() indicator light illuminates on
the instrument cluster.
2. Push the + switch up or - switch down
to change the set speed.
Push and hold to increase or decrease
...
