Hyundai Tucson (NX4) 2022-2026 Owner's Manual / Driver Assistance System / Intelligent Speed Limit Assist (ISLA)

Hyundai Tucson: Driver Assistance System / Intelligent Speed Limit Assist (ISLA)

Intelligent Speed Limit Assist uses information of road signs detected from the front view camera and uses the navigation system data to inform you of the speed limit and help maintain within the speed limit on the road.

WARNING

Intelligent Speed Limit Assist may not display the correct speed limit or may not properly control the driving speed because it is a supplemental function to inform you of the speed limit on the road.
Set your vehicle speed to the speed limit for the road and use the appropriate unit (mph or km/h) for your country.
Intelligent Speed Limit Assist may not operate properly if used in other countries.
Intelligent Speed Limit Assist may not operate properly if the navigation system is not updated regularly. (for navigation applied vehicles)

Information

Refer to the "Driver Assistance Sensors" section in this chapter for the location and the general precautions of front view camera.

Intelligent Speed Limit Assist Settings

Speed Limit With the ignition switch ON, go to User Settings > Driver Assistance > Speed limit (for cluster type) or Setup > Vehicle > Driver Assistance > Speed limit (for in ...

Other information:

Hyundai Tucson (NX4) 2022-2026 Service Manual: Side Sill Molding
- Replacement • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Put on gloves to prevent hand injuries. 1.Loosen the mounting screws, remove the side seal molding (A). 2.To install, rev ...

Hyundai Tucson (NX4) 2022-2026 Service Manual: Description and Operation
- Description • PDW consists of 8 sensors (front : 4 units, rear : 4 units) that are used to detect obstacles and transmit the result in three separate warning levels, the first, second and third to IBU via LIN communication. • IBU decides the alarm level by the transmitted communic ...