Intelligent Speed Limit Assist may warn and control your vehicle by "Displaying speed limit", "Warning overspeed" , and "Changing set speed".
Information
Intelligent Speed Limit operation is described based on the offset adjusted to "0". For more information on setting the offset, refer to "Speed Limit Offset" in this section.
Displaying speed limit
.png)
Speed limit information appears on the instrument cluster.
Warning overspeed
.png)
When driving at a speed higher than the displayed speed limit, the speed limit appears in red.
Changing set speed
.png)
If the speed limit changes when using Manual Speed Limit Assist or Smart Cruise Control, an arrow in the direction of up or down appears to inform you to change the set speed by pushing the + or – switch.
WARNING
Information
Intelligent Speed Limit Assist
Settings
Intelligent Speed Limit Assist
Malfunction and LimitationsHyundai Tucson (NX4) 2022-2026 Service Manual: SBW Control Unit(SCU)
- Component Location
1. Shift by wire Control Unit (SCU)
- Schematic Diagrams
PinFunctionPinFunction
1Power21-
2Ground22-
3H-CAN High23-
4H-CAN Low24-
5P-CAN High25-
6P-CAN Low26-
7Position sensor ground27Position sensor signal 1
8-28Position sensor signal 2
9-29P position o ...
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Low tire pressure warning
light
This warning light illuminates:
When the ignition switch is in the
ON position. The Low Tire Pressure
warning light illuminates for about 3
seconds and then goes off.
When one or more tires are
significantly underinflated. (The
location of the underinflated tire
appears on ...