Hyundai Tucson: Front Bumper / Front Bumper Beam Assembly
1. Front bumper beam assembly
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
1.Remove the front bumper assembly.(Refer to Front Bumper - "Front Bumper Assembly")
2.Loosen the mounting nuts and bolts, remove the front bumper beam (A).
3.To install, reverse removal procedure.
Radiator Grill
- Component Location
1. Radiator grill
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damag ...
Rear Bumper
...
Other information:
Hyundai Tucson (NX4) 2022-2025 Service Manual: Rear Driveshaft
- Components
1. Rear drive shaft
- Removal
• When lifting a vehicle using a lift, be careful not to damage
the lower parts of the vehicle (floor under cover, fuel filter, fuel
tank, canister).(Refer to General Information - "Lift and Support
Points")
1.Loos ...
Hyundai Tucson (NX4) 2022-2025 Owner's Manual: Recommended Cold Tire
Inflation Pressures
Check all tire pressures (including
the spare) when the tires are cold.
“Cold tires” mean the vehicle has not
been driven for at least three hours
or driven less than 1 mile (1.6 km).
Warm tires normally exceed the
recommended cold tire pressures
by 4 to 6 psi (28 to 41 kPa). Do not ...
