Hyundai Tucson Owners & Service Manuals

Hyundai Tucson: Interior Features / Floor Mat Anchor(s)

ALWAYS use the Floor Mat Anchors to attach the front floor mats to the vehicle and prevent the mats from sliding forward.

WARNING

To prevent serious injury or death from a floor mat interfering with the brake or accelerator pedals:

  • Remove any protective film on the carpet before installing a floor mat.
  • Check floor mats are securely attached to the vehicle’s floor mat anchor(s) before driving.
  • Do not use ANY floor mat that cannot be firmly attached to the vehicle’s floor mat anchors.
  • Do not stack floor mats on top of another mat (e.g. all weather rubber mat on top of a carpeted floor mat). Only a single floor mat must be installed in each position.
  • To avoid any interference with pedal operation, install only HYUNDAI floor mats designed for use in your vehicle.
    Coat Hook
    These hooks are not designed to hold large or heavy items. WARNING Only hang soft clothing without heavy, sharp or breakable objects in the clothes pockets. In a collision or when the cu ...

    Cargo Net Holder
    To keep items from shifting in the cargo area, use the 4 holders located in the cargo area side trim to attach the cargo net. Make sure the cargo net is securely attached to the holders in ...

    Other information:

    Hyundai Tucson (NX4) 2022-2026 Service Manual: Evaporator Core
    - Replacement 1.Disconnect the negative (-) battery terminal. 2.Remove the heater core.(Refer to Heater - "Heater Core") 3.Loosen the mounting screws and remove the evaporator core cover (A). 4.Remove the evaporator core (A) from the heater unit. 5.Remove the evaporator temperature sens ...

    Hyundai Tucson (NX4) 2022-2026 Service Manual: Steering Column and Shaft
    - Replacement 1.Turn the steering wheel so that the front wheels are placed in the straight ahead position. 2.Turn the ignition switch OFF and disconnect the battery negative (-) cable. 3.Remove the driver airbag (DAB).(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring") 4.R ...

    © 2023-2026 Copyright www.htucson4.com