Hyundai Tucson: Lighting System / Daytime Running Light (DRL)
1.Disconnect the negative (-) battery terminal.
2.Disconnect the daytime running light connector (A).
3.Loosen the mounting bolts and remove the daytime running light (A).
1.Install the daytime running light and connect the connector.
2.Connect the negative (-) battery terminal.
Rear Combination Lamp
- Removal
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand ...
Rear Occupant Alert
Description and Operation
- Description
The system detects the passenger in the vehicle and prevents the driver
from getting off the vehicle with the passenger in the back.
– 1st warning: I ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Rear Door Inside Handle
- Replacement
1.Disconnect the negative ( - ) battery terminal.
2.Remove the rear door trim.(Refer to Rear Door - "Rear Door Trim")
3.Loosen the mounting screws and remove the rear door inside handle (A).
4.To install, reverse removal procedure.
• Make sure the door lo ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: PTG Spindle
- Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the rear pillar trim.(Refer to Body (Interior and Exterior) - Interior Trim - Rear Pillar Trim)
3.Disconnect the PTG spindle connector (A).
4.Using a flat-tip screwdriver, remove the mounting clip (A).
5.Remove the spind ...
