Hyundai Tucson: Surround View Monitor (SVM) / Components and Components Location
Description and Operation
- Description
Surround View Monitor (SVM) is the system that allows video monitoring
of 360 degrees around the vehicle. The system includes 4 ultra optical
camera mounted around the vehicle (fr ...
Troubleshooting
- Troubleshooting
1)After replacing controller, always check that the system operates properly.
2)If the failure persists after replacing the controller, do not replace the con ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Side Impact Sensor (SIS)
- Description
1.The Side Impact Sensor (SIS) system consists of two kinds of side
impact sensor which are installed at each center of the front door
module (left and right) and two rear sensors which are installed in the
rear pillar (left and right). • The Front Side Impact Sensor is also ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Electric Shift Button
- Removal
1.Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.Remove the console upper cover.(Refer to Body (Interior and Exterior) - "Floor Console Assembly")
3.Loosen the screw and then removing the electric shift button (A).
4.Loosen the screw and then removing t ...
