Hyundai Tucson: Cylinder Head Assembly / Components and Components Location
1. Camshaft bearing cap
2. Exhaust camshaft
3. Exhaust CVVT assembly
4. Intake camshaft
5. Intake E-CVVT assembly
6. Cam carrier
7. Cylinder head
8. Swing arm
9. Hydraulic Lash Adjuster (HLA)
10. Cylinder head gasket
11. Retainer lock
12. Retainer
13. Valve spring
14. Valve stem seal
15. Exhaust valve
16. Intake valve
17. Cylinder head cover
18. Cylinder head cover gasket
19. Center bolt gasket
Cylinder Head Cover
- Removal
• Use fender covers to avoid damaging painted surfaces.
• To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Power Door Mirror Assembly
- Inspection
1.Disconnect the negative (-) battery terminal.
2.Remove the front door trim.(Refer to Body - "Front Door Trim")
3.Disconnect the power door mirror connector (A) from the
harness.Apply battery voltage to each terminal as shown in the table and
verify that the mirror operates ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Rear Pillar Trim
- Component Location
1. Rear pillar trim
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
• Take car ...
