Hyundai Tucson: Smart Cruise Control Operation / To set vehicle distance
.png)
Each time the button is pressed, the vehicle distance changes as follows:
.png)
If you drive at 56 mph (90 km/h), the distance is maintained as follows:
Distance 4 - about 172 feet (53 m)
Distance 3 - about 130 feet (40 m)
Distance 2 - about 106 feet (30 m)
Distance 1 - about 82 feet (25 m)
Information
When the engine is restarted or Smart Cruise Control is temporarily canceled, the following distance maintains the last setting.
To turn on Smart Cruise Control
Press the Driving Assist ()
button.
The speed is set to the current speed
on the instrument cluster.
If there is no vehicle in front of you,
the set speed is maintained.
If there ...
To increase speed
Push the + switch up and release it
immediately to increase the cruising
speed by 1 mph (1 km/h).
Push and hold the + switch up to
increase to the nearest multiple of 5
mph (or mult ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Joint Assembly (Wheel side)
- Removal
The type can replace the wheel side joint boot
1.Remove the front drive shaft.(Refer to Driveshaft Assembly - "Front Driveshaft")
2.Remove the trans axle side joint.(Refer to Driveshaft Assembly - "Transaxle Joint")
3.Remove the dynamic damper.(Refer to Driveshaft Assembly - "Dynam ...
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Windshield Wipers
Operates as follows when the ignition
switch is turned ON.
MIST: For a single wiping cycle,
move the lever up (MIST) and
release it. The wipers operate
continuously if the lever is
held in this position.
OFF: Wipers are not in operation.
INT: Wipers operate intermittently
at the same ...
