Hyundai Tucson: Automatic Transaxle System / Special Service Tools
| Tool (Number and Name) | Illustration | Use |
| 09200-3N000 Engine support fixture (Beam) |
| Removal and installation of the transaxle. Use this beam (SST No. : 09200-38001 or 09200-3N000) with the supporter (SST No. : 09200-2S200), and front (SST No. : 09200-L1100, 09200-L1200) |
| 09200-2S200 Engine support fixture (Supporter) |
| Removal and installation of the transaxle. with the beam (SST No. : 09200-38001 or 09200-3N000). |
| 09200-L1200 Engine support fixture (Front) |
| Removal and installation of the transaxle. with the beam (SST No. : 09200-38001 or 09200-3N000). |
| 09452-26100 Oil seal installer |
| Installation of the differential oil seal in the transaxle case and housing side (2WD).[Using with bar (SST No.09231-H1100)] |
| 09453-2W100 Oil seal installer |
| 4WD : Installation of the differential oil seal in the housing side [Using with bar (SST No.:09231-H1100)] |
| 09231-H1100 Handle |
| Installation of the differential oil seal in the transaxle case and housing side.[Using with oil seal installer (SST No.:09452-26100)] |
| 09459-4G200 Position sensor neutral fixed jig |
| Used to align the neutral position when installing the position sensor. |
Specifications
- Specifications
Item Specifications
Engine type Gasoline 2.5 GDI
Automatic transaxle type FF 8th Automatic transaxle (A8MF1)
Clutch type Torque converter
Drive system FF (Front engine Front w ...
Troubleshooting
- Troubleshooting
Fault Diagnosis
• Features a fail-safe mechanism that provides "limp-home" 5th gear
hold to enable the vehicle to be driven to the owner's home or dealer
shop.
...
Other information:
Hyundai Tucson (NX4) 2022-2025 Owner's Manual: Jack Label
The actual jack label in the vehicle may differ from the illustration.
For more detailed specifications, refer to the label attached to the jack.
1. Model Name
2. Maximum allowable load
3. Always apply the parking brake before using a jack.
4. Always turn off the engine before using a jack ...
Hyundai Tucson (NX4) 2022-2025 Service Manual: Repair procedures
- Compression Pressure Inspection
• If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure.
1.Start the engine until coolant temperature goes up to 80-95°C and stop the engine.
2.Remove the spark coils.(Refer to E ...
