Hyundai Tucson: Body Side Molding / Roof Rack
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
1.Remove the roof trim.(Refer to Roof Trim - "Roof Trim Assembly")
2.Loosen the nuts and remove the roof rack assembly (A).
Tightening torque :9.8 - 15.3 N.m (1.0 - 1.56 kgf.m, 7.2 - 11.3 lb-ft)
3.To install, reverse the removal procedure.
Rear Spoiler
- Component Location
1. Rear Spoiler
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage t ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Wireless Power Charging Unit
- Components
- Circuit Diagram
- Removal
Handling wireless charging system parts by wet hands may cause electric shock.
1.Disconnect the negative (-) battery terminal.
2.Remove the floor console assembly.(Refer to Body - "Floor Console Assembly")
3.Disconn ...
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: SRS Components
The SRS consists of the following
components:
1 Driver's front airbag module
2 Passenger's front airbag module
3 Side airbag modules
4 Curtain airbag modules
5 Retractor pretensioner
6 Airbag warning light
7 SRS control module (SRSCM)/Rollover
sensor
8 Front impact sensors
9 S ...
