Rear Occupant Alert is provided to prevent the driver from leaving with any rear passenger left in the vehicle.
Rear Occupant Alert Settings
To use Rear Occupant Alert, it can be enabled from the Settings menu in the instrument cluster or infotainment system.
Select:
Rear Occupant Alert Operations
When you turn off the engine and open the driver’s door after opening and closing the rear door or liftgate, the "Check rear seats" warning message appears on the instrument cluster.
After the first alert, the second alert operates when any movement is detected in the vehicle after the driver’s door is closed and all the doors are locked. The horn sounds for approximately 25 seconds. If the system continues to detect a movement, the alert operates up to 8 times. Unlock the doors with the smart key to stop the alert.
The system detects movement in the vehicle for 8 hours after the door is locked.
Information
.png)
WARNING
Even if your vehicle is equipped with Rear Occupant Alert, always check the rear seats before you leave the vehicle.
Rear Occupant Alert may not operate when:
Theft-alarm SystemHyundai Tucson (NX4) 2022-2026 Owner's Manual: Drive Mode Integrated Control System
Type A
Type B
The drive mode can be selected
according to the driver’s preference or
road condition.
The system resets to NORMAL mode,
when the engine is restarted.
Information
If there is a problem with the instrument
cluster, the drive mode is in NORMAL
mode and may not change ...
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Rear Window Wiper and Washer
The rear window wiper and washer
switch is located at the end of the wiper
and washer switch lever. Turn the switch
to the desired position to operate the
rear wiper and washer.
HI – High wiper speed
LO – Low wiper speed
OFF – Off
Push the lever away from you to spray
rear ...