Radial-ply tires provide improved tread life, road hazard resistance and smoother high speed ride. The radial-ply tires used on this vehicle are of belted construction, and are selected to complement the ride and handling characteristics of your vehicle. Radial-ply tires have the same load carrying capacity, as bias-ply or bias belted tires of the same size, and use the same recommended inflation pressure. Mixing of radial-ply tires with bias-ply or bias belted tires is not recommended. Any combinations of radial-ply and bias-ply or bias belted tires when used on the same vehicle will seriously deteriorate vehicle handling. The best rule to follow is to use identical radial-ply tires as a pair for the the front tires and rear tires.
Longer wearing tires can be more susceptible to irregular tread wear. It is very important to follow the tire rotation interval in this chapter to achieve the tread life potential of these tires. Cuts and punctures in radial-ply tires are repairable only in the tread area, because of sidewall flexing. Consult your tire dealer for radial-ply tire repairs.
WARNING
Do not mix bias ply and radial ply tires under any circumstances. This may cause unusual handling characteristics that may cause loss of vehicle control and result in a collision.
Hyundai Tucson (NX4) 2022-2024 Owner's Manual: Headlight, Parking light, Turn
Signal light, Daytime Running
Light (DRL) Replacement
1 Headlight (Low)
2 Headlight (High)
3 Daytime Running Light (DRL)/
Parking light
4 Turn signal light
5 Front side marker
If the LED light does not operate, contact
an authorized HYUNDAI dealer for
replacement.
The LED light cannot be replaced as a
single unit. A skilled technici ...
Hyundai Tucson (NX4) 2022-2024 Owner's Manual: Smart Cruise Control Operation
Operating conditions
Basic function
Smart Cruise Control operates when the
following conditions are met:
The gear is in D (Drive).
Your vehicle speed is within the
operating speed range.
- 5-110 mph (10-180 km/h): When
there is no vehicle in front
- 0-110 mph (0-180 km/h): When ...