With the door inside handle
.png)
Driver door & Passenger door
If the inner door handle is pulled when the door is locked, the door is unlocked and opened.
Rear door - Two pull operation
If the inner door handle is pulled once when the door is locked, the door is unlocked. If the inner door handle is pulled once more, the door is opened.
With the door lock/unlock switch
.png)
When pressing the (
) portion 1 on
the
switch, all vehicle doors are locked.
When pressing the (
) portion 2 on
the
switch, all vehicle doors are unlocked.
When all vehicle doors are locked, the
indicator lights 3 on the driver’s door
and passenger’s door turn on. If any door
is unlocked, the indicator turns off.
WARNING
WARNING
Do not leave the elderly, children, or animals unattended in your vehicle. An enclosed vehicle can become extremely hot and the elderly, unattended children or animals who cannot escape the vehicle may be seriously injured or killed.
WARNING
Always park your vehicle properly. Depress the brake pedal, change the gear to P (Park), apply the parking brake, move the ignition switch to the LOCK/ OFF position, close all windows, lock all doors, and always take the keys with you.
WARNING
Be careful when opening doors and watch for vehicles, motorcycles, bicycles, or pedestrians approaching the vehicle to prevent serious injury or death.
Information
To exit the vehicle if the power door lock does not function:
Operating Door Locks from
Outside the Vehicle
Auto Door Lock/Unlock Features. Child-protector Rear Door LocksHyundai Tucson (NX4) 2022-2026 Service Manual: Seat Heater Switch
- Components
1. Front seat heater switch2. Rear seat heater switch
- Circuit Diagram
Connector Pin Information
PinDescriptionPinDescription
1IGN 117PDW switch
2ILL (+)18PDW IND
34WD lock swtich19-
4Grip control swtich (+)20Heater LH
5Grip control swtich (-)21Heater IND High_LH
...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Blower Resistor (Manual)
- Inspection
1.Measure the resistance between the terminals.
2.The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor)
- Replacement
1.Disconnect the negative (-) battery terminal.
2.Remove the glove box.(Refer to Body (In ...