Hyundai Tucson: Navigation-Based Smart Cruise Control (NSCC) / Navigation-based Smart Cruise Control Settings
Highway Auto Speed Change
.png)
With the ignition switch ON, go to Setup > Vehicle > Driver Assistance > Driving Convenience > Highway Auto Speed Change (for infotainment system type) from the Settings menu to turn Navigation-based Smart Cruise Control on and off.
Information
When there is a problem with Navigation-based Smart Cruise Control, the function cannot be set from the settings menu.
Navigation-Based Smart Cruise Control (NSCC)
Navigation-based Smart Cruise Control
helps maintain the speed depending
on the road conditions when driving on
highways by using information from the
navigation system while Smart Cruise
Co ...
Navigation-based Smart Cruise
Control Operation
Navigation-based Smart Cruise Control
may be available when:
Highway Auto Speed Change is
selected from the settings menu.
Smart Cruise Control is operating.
You are driving on controlled ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Cowl Side Trim
- Component Location
1. Cwol side trim
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
• Take care ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Smart Key
- Smart Key
Smart Key Code Saving
1.Connect the DLC cable of diagnostic tool to the data link connector
(16 pins) in driver side crash pad lower panel, turn the power on
diagnostic tool.
2.Select the 'S/W Management' and 'Car model'.
3.Select the 'Smart Key Unit' and 'Smart Key Code Sav ...
