Hyundai Tucson: Engine Control / Fuel System / ISG (Idle Stop & Go) System
Integrated Thermal Management Module (ITM)
- Description
Integrated Thermal Management Module (ITM) is a device that controls
the coolant flow rate according to coolant temperature. At initial
startup, the ITM quickly warms up the engin ...
Description and Operation
- Description
Idle Stop & Go (ISG) system switches off the ignition when vehicle
is stopped, and then restarts the ignition and starts the vehicle when
accelerator is pushed. It temporarily ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Rear Cross-Traffic Collision Warning (RCCW)
Rear Cross-Traffic Collision Warning uses
the rear corner radars to help detect
vehicles approaching from the left or
right while your vehicle is reversing, and
to warn you that a collision is imminent
with a warning message and an audible
warning.
A: Rear Cross-Traffic Collision Warn ...
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Turn Signals and Lane Change
Signals
To signal a turn, push down on the lever
for a left turn or up for a right turn in
position A .
If an indicator stays on and does not
flash or if it flashes abnormally, one of
the turn signal bulbs may be burned out
and require replacement. Contact an
authorized HYNDAI dealer.
One to ...
