The Integrated Memory System for the driver’s seat is equipped on some models and allows the driver to store and recall the driver’s seat position.
WARNING
Never attempt to operate the Integrated Memory System while the vehicle is moving.
Information
Storing Memory Positions
1. Make sure the Button Start ignition switch is in the ON position and the gear is in P (Park).
2. Adjust the driver’s seat to the desired position.
3. Press the SET button. The system beeps once and notifies you to press the button to save settings on the cluster display.
4. Press one of the memory buttons (1 or 2) within 4 seconds. The system beeps twice when successfully stored.
5. “Driver 1 (or 2) settings saved” appears on the cluster display.
Recalling Memory Positions
1. Make sure the Button Start ignition switch is in the ON position and the gear is in P (Park).
2. Press the desired button (1 or 2). The system beeps once and the driver’s seat position is automatically adjusted to the stored positions.
3. “Driver 1 (or 2) settings applied” appears on the cluster display.
Information
Resetting the Integrated Memory System
1. Make sure that the gear is in P (Park) and the engine is ON, and then open the driver’s door.
2. Adjust the driver’s seat to the most forward and upright positions.
3. Press and hold both the SET button and the driver’s seat movement switch.
While Resetting Integrated Memory System
A notification sound is heard and the seat is adjusted to the most reward position. Then the seat and seatback move to the default center position.
The resetting procedure and the notification sound may stop if:
Information
Seat Easy Access Operation
The system moves the driver’s seat automatically as follows:
Vehicles equipped with Driver’s Power Seat and Smart Key
- The driver’s seat moves rearward
when the Button Start ignition
switch is pressed to turn the OFF
position.
- The driver’s seat moves forward
when the Button Start ignition
switch is pressed to the ACC or
START position.
Seat Easy Access operation may be limited when the driver’s seat position setting is already close to the maximum rearward travel position.
You can enable or disable the Seat Easy Access feature in the Settings menu in the instrument cluster or infotainment system on some models.
- User Settings > Convenience > Seat
Easy Access > Off/Normal/Extended
(for cluster type)
- Setup > Vehicle > Seat > Seat Easy
Access > Normal/Extended/Off (for
infotainment system type)
Information
WARNING
To prevent injury or property damage, be aware if there are objects or passengers in the driver’s side rear seat or seat floor. To stop movement of the front seat, press the SET button or any of the driver’s seat control switches.
Hyundai Tucson (NX4) 2022-2025 Service Manual: Rear Upper Arm
- Removal
• When lifting a vehicle using a lift, be careful not to damage
the lower parts of the vehicle (floor under cover, fuel filter, fuel
tank, canister).(Refer to General Information - "Lift and Support
Points")
1.Loosen the rear wheel nuts slightly.Raise the v ...
Hyundai Tucson (NX4) 2022-2025 Owner's Manual: Remotely moving vehicle forward or
backward. Using panic alarm
Remotely moving vehicle forward or
backward (if equipped)
Some models are equipped with the
Remote Smart Parking Assist feature.
With the smart key, the vehicle can be
moved forward or backward remotely to
enter or exit a tight parking space.
For more information, refer to the
“Remot ...