• Reminds you to be especially careful in those areas where carelessness will cause death or serious injury.
• Reminds you to be especially careful in those areas where carelessness may cause death or serious injury.
• Reminds you to be especially careful in those areas where carelessness may cause personal injury.
• Gives you information that will prevent you from making errors that could damage the vehicle.
• Gives you added information that will help you complete a particular procedure.
The following list contains some general WARNINGS that you should follow while working on a vehicle.• Always wear safety glasses for eye protection.
• Use safety stands whenever a procedure requires you to be under the vehicle.
• Make sure that the ignition switch is always in the OFF position, unless otherwise required by the procedure.
• Set the parking brake when working on the vehicle. If you have an automatic transaxle, set in park unless instructed otherwise for a specific operation.
• Place supporters against the front and rear surfaces of the tires to help prevent the vehicle from moving.
• Operate the engine only in a well-ventilated area to avoid the danger of carbon monoxide poisoning.
• Keep yourself and your clothing away from moving parts when the engine is running, especially the drive belts.
• To prevent serious burns, avoid contact with hot metal parts such as the radiator, exhaust manifold, tail pipe, catalytic converter and muffler.
• Do not smoke while working on a vehicle.
• To avoid injury, always remove rings, watches, loose hanging jewelry, and loose clothing before beginning to work on a vehicle.
• When it is necessary to work under the hood, keep phands and other objects clear of the radiator fan blades! Your vehicle may be equipped with a cooling fan that may turn on, even though the ignition switch is in the OFF position. For this reason care should be taken to ensure that the radiator fan electric motor is completely disconnected when working under the hood and the engine is not running.
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Temperature & Air intake control
Temperature control
The temperature increases by turning
the knob to the right. The temperature
decreases by turning the knob to the left.
Air intake control
To select outside (fresh) air or
recirculated air, press this button.
Recirculated air position
With the recirculated air
sel ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Crash Pad Center Panel
- Component Location
1. Crash pad center panel
- Replacement
• When prying with a flat-tip screwdriver, wrap it with protective
tape, and apply protective tape around the related parts, to prevent
damage.
• Put on gloves to protect your hands.
& ...