.png)
Downhill Brake Control assists when descending down a steep hill without having to depress the brake pedal.
The system automatically applies the brakes to maintain vehicle speed below a certain speed and allows the driver to concentrate on steering the vehicle down hill.
The system is turned off whenever the engine is turned off.
Press the button to turn on the system and press the button again to turn it off.
.png)
.png)
Downhill Brake Control disabled. Control vehicle speed
If Downhill Brake Control is not working properly, this warning message appears on the cluster display and you may hear a warning sound. If this occurs, control the vehicle speed by depressing the brake pedal.
WARNING
Always turn off Downhill Brake Control on normal roads. The system might activate inadvertently from the standby mode when driving through speed bumps or making sharp curves.
Information
Hill-Start Assist Control (HAC)Hyundai Tucson (NX4) 2022-2026 Owner's Manual: ESC operation
ESC ON condition
When the ignition switch is in the ON
position, ESC and the ESC OFF indicator
lights illuminate for about three seconds.
After both lights go off, ESC is enabled.
When operating
When ESC is operating, the ESC
indicator light blinks:
When you apply your brakes under ...
Hyundai Tucson (NX4) 2022-2026 Owner's Manual: Passenger and Rear Seat Belts –
3-point system with convertible
locking retractor
This type of seat belt combines both
an emergency locking retractor and an
automatic locking retractor. Convertible
retractor type seat belts are installed
in the rear seat positions to help
accommodate the installation of child
restraint systems.
A convertible retractor is also install ...