Hyundai Tucson: Automatic Transaxle Cooling System / Description and Operation
• Engine coolant is used for circulating heat in order to heat and cool the transaxle oil.
• Prevents over heating of the transaxle oil while the vehicle is moving.
Oil Cooler
- Removal
• ATF cooler is a unit with the radiator, so refer to radiator
removal / installation procedures in the engine section.(Refer to Engine
Mechanical System - "Radi ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Master Cylinder
- Components
1. Reservoir cap2. Reservoir3. Brake booster4. Master cylinder5. Push rod
- Removal
1.Turm ignition switch OFF and disconnect the negative (-) battery cable.
2.Remove the battery.(Refer to Engine Electrical System - "Battery")
3.Disconnect the brake fluid level sensor c ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Purge Control Solenoid Valve (PCSV)
- Description
Purge Control Solenoid Valve (PCSV) is a solenoid valve and is
installed on the surge tank and controls the passage between the
canister and the intake manifold.The evaporative gases gathered in the
canister are delivered to the intake manifold when the PCSV is open by
ECM c ...
