Hyundai Tucson Owners & Service Manuals

Hyundai Tucson: Maintenance / Cabin Air Filter

Filter Inspection

The cabin air filter must be replaced according to the Maintenance Schedule. If the vehicle operates in severely airpolluted cities or on dusty rough roads for a long time, have it inspected more frequently and replaced immediately. Replace the cabin air filter by following the procedure below and be careful to avoid damaging other components.

Filter Replacement

1. Open the glove box and remove the support rod (1).

2. Push in both sides of the glove box to release the glove box stopper pins and allow the glove box to hang open.

3. Press and hold the lock on the right side of the cover.

4. Pull out the cover.

5. Replace the cabin air filter.

6. Reassemble in the reverse order of disassembly.

NOTICE

Install a new cabin air filter with the arrow symbol () facing down, to improve effectiveness.

    Air Cleaner
    Filter Replacement The air cleaner filter can be cleaned for inspection using compressed air. Do not attempt to wash or rinse it, because water can damage the filter. If soiled, replace the ...

    Wiper Blades
    Blade Inspection Contamination of the windshield or wiper blades with foreign substances may reduce the effectiveness of the windshield wipers. Common sources of contamination are insects, t ...

    Other information:

    Hyundai Tucson (NX4) 2022-2025 Service Manual: Special Service Tools
    - Special Service Tools Tool (Number and name)IllustrationApplication 09353-24100Fuel Pressure Gauge Measuring the fuel line pressure 0K353-D4100Fuel Pressure Gauge Adapter Connection between the high pressure fuel pump and fuel feed line.※ SST No. 09353-02100 model also can be used. 09353-L ...

    Hyundai Tucson (NX4) 2022-2025 Service Manual: Side Sill Molding
    - Replacement     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Put on gloves to prevent hand injuries. 1.Loosen the mounting screws, remove the side seal molding (A). 2.To install, rev ...

    © 2023-2025 Copyright www.htucson4.com