Hyundai Tucson Owners & Service Manuals
Hyundai Tucson (NX4) 2022-2025 Owner's Manual / Maintenance / Tires and Wheels / Wheel Replacement. Tire Traction. Tire Maintenance

Hyundai Tucson: Tires and Wheels / Wheel Replacement. Tire Traction. Tire Maintenance

Wheel Replacement

When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width, and offset.

Tire Traction

Tire traction can be reduced if you drive on worn tires or the tires that are improperly inflated, or on slippery road surfaces. Replace the tires when tread wear indicators appear. To reduce the possibility of losing control, slow down whenever there is rain, snow, or ice on the road.

Tire Maintenance

In addition to proper inflation, correct wheel alignment helps decrease the tire wear. If you find a tire is worn unevenly, have your dealer check the wheel alignment. When you have new tires installed, make sure they are balanced. This may increase ride comfort and tire life. Additionally, a tire must always be rebalanced if it is removed from the wheel.

    Tire Replacement
    If the tire is worn evenly, a tread wear indicator appears as a solid band across the tread. This shows there is less than 1/16 inch (1.6mm) of tread left on the tire. Replace the tire whe ...

    Tire Sidewall Labeling
    This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be ...

    Other information:

    Hyundai Tucson (NX4) 2022-2025 Service Manual: Schematic Diagrams
    - Schematic Diagrams Harness Connector CONNECTOR NAMEPIN NUMBERNAMEFUNCTION BATTERY1B +BATTERY + 2GNDBATTERY - TORQUE1TORQUE2TORQUE1_SUB &2ANGLE2PWM2 ANGLE3TORQUE4TORQUE2_SUB SENSOR4POWER2SENSOR POWER2 5TORQUE3TORQUE2_MAIN 6POWER1SENSOR POWER1 7GND1GND1 8TORQUE1TORQUE1_MAIN ...

    Hyundai Tucson (NX4) 2022-2025 Service Manual: Rear Washer Switch
    - Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the clock spring.(Refer to Restraint - "Driver Airbag(DAB) and Clock Spring") 3.Disconnect multifunction switch assembly connector (A). 4.Remove the multifunction switch assembly (B) after loosening the clamp (A).Tightening ...

    В© 2023-2025 Copyright www.htucson4.com