Hyundai Tucson: Parking Distance Warning (PDW) / Ultrasonic Sensor
1.Disconnect the negative (-) battery terminal.
2.Remove the front/rear bumper assembly.(Refer to Body - "Front Bumper Assembly")(Refer to Body - "Rear Bumper Cover")
3.Disconnect the connector from the parking distance warning sensor.
4.Pull out the sensor (A) by opening the sensor holder out.
1.Install the Parking distance warning sensor after connecting the connector.
2.Install the front/rear bumper cover.
3.Connect the negative (-) battery terminal.
Specifications
- Specifications
[ADAS_PRK Application Specification (Valeo)]
ItemSpecification
Ultrasonic sensorVoltage ratingDC 12V
Detecting range40cm ~ 120cm
Operating voltageDC 9V ~ 16V
Operation current ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Release Residual Pressure in Fuel Line
- Release Residual Pressure in Fuel Line
• There may be some residual pressure even after "Release Residual
Pressure in Fuel Line" work, so cover the hose connection with a shop
towel to prevent residual fuel from spilling out before disconnecting
any fuel connection.
...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Front Wheel Transfer Assembly
- Removal
[A Type]
• Be careful not to damage the parts located under the vehicle
(floor under cover, fuel filter, fuel tank and canister) when raising
the vehicle using the lift.(Refer to General Information - "Lift and
Support Points")
1.Remove the engine room und ...
