| Trouble symptom | Probable cause | Remedy |
| Engine will not start or is hard to start (Cranks OK) | Ignition lock switch | Inspect ignition lock switch, or replace as required |
| Ignition coil | Inspect ignition coil, or replace as required | |
| Spark plugs | Inspect spark plugs, or replace as required | |
| Ignition wiring disconnected or broken | Repair wiring, or replace as required | |
| Rough idle or stalls | Ignition wiring | Repair wiring, or replace as required |
| Ignition coil | Inspect ignition coil, or replace as required | |
| Engine hesitates/poor acceleration | Spark plugs | Inspect spark plugs, or replace as required |
| Ignition wiring | Repair wiring, or replace as required |
Description and Operation
Schematic DiagramsHyundai Tucson (NX4) 2022-2026 Service Manual: Description and Operation
- Description
• Automatic transaxle system relies on various measurement data to
determine the current control status and extrapolate the necessary
compensation values.
• These values are used to control the actuators and achieve the desired control output.
• If a problem with th ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Overhead Console Lamp
- Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the overhead console cover (A).
3.Remove the mounting screws.and then remove the overhead console (A).
4.Remove the overhead console after disconnect the connector (A).
- Installation
1.Install the overhead console l ...