Hyundai Tucson: Braking System / Trailer Stability Assist (TSA)
Trailer Stability Assist is operated as a vehicle stability control system. The Trailer Stability Assist stabilizes the vehicle and trailer when the trailer sways or oscillates. In most cases, trailer sway happens at high speeds.
Factors that can cause trailer sway include:
- High speed
- Strong crosswinds
- Improper overloading
- Sudden steering inputs
- Uneven road
When the Trailer Stability Assist detects sway, the front brakes are applied automatically. If it is not enough braking, the brakes are applied on all wheels automatically and engine power is reduced.
Vehicle Stability Management
(VSM)
Vehicle Stability Management is a
function of the Electronic Stability
Control (ESC) system. It helps the vehicle
stay stable when accelerating or braking
suddenly on wet, slippery, and rough ...
Hill-Start Assist Control (HAC)
Hill-Start Assist Control helps prevent
the vehicle from rolling backwards when
starting from a stop on a hill.
WARNING
Always be ready to depress the
accelerator pedal when starting from
a ...
Other information:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Rear Coil Spring
- Removal
• When lifting a vehicle using a lift, be careful not to damage
the lower parts of the vehicle (floor under cover, fuel filter, fuel
tank, canister).(Refer to General Information - "Lift and Support
Points")
1.Loosen the rear wheel nuts slightly.Raise the v ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Knock Sensor (KS)
- Description
Knocking is a phenomenon characterized by undesirable vibration and
noise and can cause engine damage. Knock Sensor (KS) is installed on the
cylinder block and senses engine knocking.When knocking occurs, the
vibration from the cylinder block is applied as pressure to the
pi ...
