WARNING
Performing maintenance on the vehicle can be dangerous. If you lack sufficient knowledge, experience, or proper tools and equipment to do the work, we recommend to have it done by an authorized HYUNDAI dealer. Before performing maintenance:
WARNING
Do not touch metal parts (including strut bars) while the engine is operating or hot to prevent serious injury. Turn off the engine and wait until the metal parts cool down before working on the vehicle.
The following lists are vehicle checks and inspections that should be performed by the owner or an authorized HYUNDAI dealer at the frequencies indicated to help ensure safe and dependable operation of your vehicle.
Any adverse conditions should be brought to the attention of your authorized HYUNDAI dealer as soon as possible.
These Owner Maintenance vehicle checks are generally not covered by warranties and you may be charged for labor, parts, and lubricants used.
When you stop for fuel:
While operating your vehicle:
At least monthly:
WARNING
Be careful when checking your coolant level if the engine is hot. This may result in coolant being blown out of the opening and cause serious burns and other injuries.
At least twice a year:
At least once a year:
Hyundai Tucson (NX4) 2022-2026 Service Manual: Components and Components Location
- Component Location
[Fuel Tank]
1. Fuel tank2. Canister3. Vapor hose4. Canister Close Valve (CCV)5. Vent hose6. Fuel filler hose7. Fuel tank air filter8. Fuel Tank Pressure Sensor (FTPS)9. Fuel Level Sender (FLS)10. Fuel pump11. Fuel filter12. Fuel pressure regulator
[High Pressure Fuel Li ...
Hyundai Tucson (NX4) 2022-2026 Service Manual: Repair procedures
- Alignment
Glass step alignment
1.Perform considerable step alignment after replacing movable glass (A).
â‘
â‘¡
â‘¢
2.Perfrom height adjustment releasing screw (A) a bit.
• Be careful not to damage screws.
3.Remove the decoration cover (A).
4.Tighten ...