Hyundai Tucson: Hood / Repair procedures
1.After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up and down or from side to side and tighten the bolt.
2.Adjust the hood height by moving the hood overslam bumpers (C) up and down.
3.After loosening the hood latch (D) mounting bolts, adjust the latch by moving it up and down or from side to side.
Hood
...
Hood Assembly
- Component Location
1. Hood assembly
- Replacement
• Wear gloves to protect hands from injury.
• Be careful not to damage the hood and bo ...
Other information:
Hyundai Tucson (NX4) 2022-2025 Service Manual: Front Bumper Beam Assembly
- Component Location
1. Front bumper beam assembly
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
1.Remove the front bum ...
Hyundai Tucson (NX4) 2022-2025 Service Manual: Repair procedures
- Removal
1.Remove the front bumper assembly.(Refer to Body - "Front Bumper Assembly")
2.Remove the bolts and disconnect the horn connectors (C), then remove the high pitch horn (B) and low pitch horn (A).
- Installation
1.Install the horns after connecting the horn connectors.
2.Ins ...
